Fuel Injection improvements on the DUCATI Hyperstrada 939 are usually expensive and complicated. The BoosterPlug is a better and proven alternative.
No need to spend a small fortune on complicated devices like the Power Commander + endless Dyno hours, to make your bike run like it should have from the factory.
No complicated mechanical work or programming is required when installing the BoosterPlug. You simply plug it in using the original connectors and you are done.
Inexpensive, easy installation, proven results:
- Soft and smooth throttle response
- Stronger acceleration
- The end of the dreaded low speed surging
- Stronger idle - no more stalling problems
- Reduced popping in your aftermarket exhaust
This version of the BoosterPlug covers all versions of the DUCATI Hyperstrada 939.
Note: The Ducati Hyperstrada 939 is using the same temperature sensor for the fuel injection calculations as for the temperature readout in the dashboard. (Most other brands have seperate sensors).
This means that your dashboard display will show 20°C / 35°F lower than actual ambient temperature when you install the BoosterPlug, and you may get an ice warning in the dashboard too.
There's no way around this, and it's probably not an issue for most people, but we want you to be informed about it - and it's an easy way to see that the BoosterPlug is working as intended :-)
General Installation Instructions
Bike Specific Installation Instructions