The BoosterPlug is the easiest and most efficient way to upgrade the fuel injection on your DUCATI Panigale V4 and solve the common lean running problems.
No need to spend a small fortune on complicated tuning devices like the Power Commander + endless Dyno hours, to make your bike run like it should have from the factory.
Installation couldn't be easier - The BoosterPlug tuning module comes with the correct connectors to let you plug it in to the bikes wire harness. No programming required.
The smarter choice to optimize the fuel Injection on your motorcycle:
- Eliminate the poor on/off like throttle action
- Better acceleration
- Eliminate the low speed surge problem
- Stronger idle and less tendency to stall
- Reduced popping in your aftermarket exhaust
This version of the BoosterPlug covers all versions of the DUCATI Panigale V4 from 2018 to 2020, including the S and the Speciale versions.
Please note that we can not build a BoosterPlug for the "2021 and newer" model due to new emission regulations. You can see the detailed explanation here
Note: The Ducati Panigale series is using the same temperature sensor for the fuel injection calculations as for the temperature readout in the dashboard. (Most other brands have seperate sensors). This means that your dashboard display will show 20°C / 35°F lower than actual ambient temperature when you install the BoosterPlug. There's no way around this, and it's probably not an issue for most people, but we want you to be informed about it.